第一篇：clean the CGI corruption

clean the CGI corruption in standby side

（1）FCSEI;

MML-S

（2）At separate CP side:

CACLP;

CACLS:DAY=day, TIME=time,DATE=date;

SYATI;

打小补丁，up del cell.txt

!All operation(commands)should be done in separate CP side.！Don't forget to take log!.MGAAP:AREA=All;

(All AREA should be undefined):

MGAAE:AREA=Area cluster name;

MGAAP:AREA=All;(no any AREA defined)

MGOCP:CELL=All;

(All outer CELL should be undefined):

MGOCE:CELL=Cell name;

MGOCP:CELL=All;

MGMAP:LAI=Locatio area identity;

(All UMTS paging area should be undefined):

MGMAE:LAI=lai,RNC=Rnc name;

MGMAP:LAI=Location area identity;

MGLAP;

(All location area should be undefined):

MGLAE:LAI=Location area identity;

MGLAP;

MGLNP:LOCNO=ALL,ATYPE=ALL,CTYPE=ALL;

(All location number should be undefined, except OWN Locno): MGLNE:LOCNO=Location number;

MGLNP:LOCNO=ALL,ATYPE=ALL,CTYPE=ALL;

MGRIP:RNC=All;

(All RNC should be undefined):

MGRIE:RNC=Rnc name;

MGRIP:RNC=All;

(Check outer RNC and if exists undefined it):

MGORP:RNC=All;

MGORE:RNC=Rnc;

MGNMP:MSC=All;

(All neighbouring MSC should be undefined):

MGNME:MSC=Msc name;

MGNMP:MSC=ALL;

(OWN service area name should be undefined):

MGLCE:MSC=OWN;

(Own location number undefined):

MGLNE:LOCNO=Own Location number;

(Check that all data belonging to the block MBSSD are undefined): MGRLP:lai=All;

MGNRP:lai=All;

MGLNP:LOCNO=ALL,ATYPE=ALL,CTYPE=ALL;

MGLCP:cell=all,LAI=All;

MGGDP:LAI=All;

MGCRP:LAI=All;

MGCHP:LAI=All;

（3）If all data is undefined and corruption is present, some SAE, will be impossible decreasing to 0, in(Take all SAE bellonging to the block MBSSD):

SAAEP:SAE=ALL,BLOCK=MBSSD;

SAADI:SAE=132,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:2;!CELLSTATE!

SET VAR MBSSD 0-:2=0;

PRINT VAR MBSSD 0-:2;

END TEST;

SAADI:SAE=132,NI=0;

SAADI:SAE=285,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:3;!LASTATE!

SET VAR MBSSD 0-:3=0;

PRINT VAR MBSSD 0-:3;

END TEST;

SAADI:SAE=285,NI=0;

SAADI:SAE=901,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:324;!TVALUE!

SET VAR MBSSD 0-:324=0;

PRINT VAR MBSSD 0-:324;

END TEST;

SAADI:SAE=901,NI=0;

SAADI:SAE=1096,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:400;!OCCUPATIONFLAG!

SET VAR MBSSD 0-:400=0;

PRINT VAR MBSSD 0-:400;

END TEST;

SAADI:SAE=1096,NI=0;

SAADI:SAE=1100,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:210;!RNCSTATE!

SET VAR MBSSD 0-:210=0;

PRINT VAR MBSSD 0-:210;

END TEST;

SAADI:SAE=1100,NI=0;

SAADI:SAE=1137,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:461;!AREASTATE!

SET VAR MBSSD 0-:461=0;

PRINT VAR MBSSD 0-:461;

END TEST;

SAADI:SAE=1137,NI=0;

SAADI:SAE=1141,NI=0;

TEST SYSTEM;

PRINT VAR MBSSD 0-:570;!FIRSTFREENMSCPTRINDEX!

SET VAR MBSSD 0-:570=0;

PRINT VAR MBSSD 0-:570;

END TEST;

SAADI:SAE=1141,NI=0;

SAADI:SAE=611,NI=0,BLOCK=MBSSD;

TEST SYSTEM;

PRINT VAR MBSSD 0-:500;!ELEMENTSTATE!

SET VAR MBSSD 0-:500=0;

PRINT VAR MBSSD 0-:500;

END TEST;

SAADI:SAE=611,NI=0,BLOCK=MBSSD;

SAADI:SAE=612,NI=0,BLOCK=MBSSD;

TEST SYSTEM;

PRINT VAR MBSSD 0-:510;!PLMNSTATE!

SET VAR MBSSD 0-:510=0;

PRINT VAR MBSSD 0-:510;

END TEST;

SAADI:SAE=687,NI=0,BLOCK=MBSSD;

TEST SYSTEM;

PRINT VAR MBSSD 0-:6;!RTREENODSTATE!

SET VAR MBSSD 0-:6=0;

PRINT VAR MBSSD 0-:6;

END TEST;

SAADI:SAE=687,NI=0,BLOCK=MBSSD;

SAADI:SAE=688,NI=0,BLOCK=MBSSD;

TEST SYSTEM;

PRINT VAR MBSSD 0-:4;!LNNODESTATE!

SET VAR MBSSD 0-:4=0;

PRINT VAR MBSSD 0-:4;

END TEST;

SAADI:SAE=688,NI=0,BLOCK=MBSSD;

TEST SYSTEM;

print var mbssd 0-:3;

print var mbssd 0-:61;

print var mbssd 0-:62(0-);

print var mbssd 0-:322(0-);

print var mbssd 0-:323(0-);

print var mbssd 0-:512(0-);

SET VAR MBSSD 0-:3=0;

set var mbssd 0-:61=0;

set var mbssd 0-:62(0-)=0;

set var mbssd 0-:322(0-)=0;

set var mbssd 0-:323(0-)=0;

set var mbssd 0-:512(0-)=0;

END TEST;

（4）Increase all SAE according previous value:

Increase the sae directly to enough ni.SAAII:SAE=132,NI=ni;

！！SAAII:SAE=255,NI=ni;

SAAII:SAE=285,NI=ni;

SAAII:SAE=901,NI=ni;

SAAII:SAE=1096,NI=ni

SAAII:SAE=1100,NI=ni;

SAAII:SAE=1137,NI=ni;

SAAII:SAE=1141,NI=ni;

SAAII:SAE=611,NI=ni,BLOCK=MBSSD;

SAAII:SAE=612,NI=ni,BLOCK=MBSSD;

SAAII:SAE=687,NI=ni,BLOCK=MBSSD;

SAAII:SAE=688,NI=ni,BLOCK=MBSSD;

MGNMP:MSC=ALL;

MGNMI:MSC=Msc name,MSCADDR=Msc adrress name,R=MHOC;

MGNMP:MSC=ALL;

MGLAP;

MGLAI:LAI=Lai

number;

MGLAP;

MGLNP:LOCNO=ALL,ATYPE=ALL,CTYPE=All;

MGLNI:locno=Locno number;

MGLNP:LOCNO=ALL,ATYPE=ALL,CTYPE=All;

MGLCP:MSC=all;

MGLCI:msc=OWN ,locno=Locno number;

MGLCIi:msc=Msc name,locno=Location number;

MGOCI:cell=name of outer cell,lai=Lai number,msc=Msc name;

MGRII:RNC=Rnc name,RNCID=Rnc identity,R1=Name of the outgoing traffic route,R2=Name of the incoming traffic route;

MGMAI:LAI=Location area identity,RNC=Rnc name;

MGAAI:AREA=Area Cluster name,LAI=Location area name;

MGAAC:AREA=Area Cluster name,RO=Routing origin for mobile originating calls,CO=Charging origin for mobile originating calls,EA=Emergency area category;标记蓝色部分未执行。

！Repeat Step(3),(4),(5)again without any set var, confirm the size can be decreased successfully.a.MGCEE;MGAAE;MGLAE;MGOCE;MGORE;MGRIE;MGNME;MGLNE;MGLCE;b.SAADI:SAE=132,285,901,10961,1096,1100,1137,1141,611,612,687,688;Decrease size successfully.c.SAAII:SAE=132,285,901,10961,1096,1100,1137,1141,611,612,687,688;d.MGNMI;MGLAI;MGLCI;MGOCI;MGRII;MGMAI;MGAAI;MGCEI;

e.MGNMP;MGLAP;MGLCP;MGOCP;MGRIP;MGMAP;MGAAP;MGCEP;

check all data are OK.对比MGCEP:CELL=all;的输出与，BSC_CELL_POOLx文档的区别。

打corr-for-mip.TXT

关掉临时补丁up del cell。

From AD in the EX-side:

翻边之前在执行侧做大启动。

syrei:RANK=LARGE,EXPL=OTHER;

FCSWI:CTYPE=NOTR;

Afer SYSTEM RESTART LARGE checkthat traffic cases work normal

After successful Tests put CP in parallel

DPPAI;

SYBUP:FILE=relfswX;

健康检查。